GRAPHITED CORRUGATED METAL
GASKET GMG (ELASTAGRAPH)
GASKET GMG (ELASTAGRAPH)
Elastagraph gaskets are made by infusing a seamless
layer of flexible graphite at varying densities and thicknesses over a corrugated metallic
core; the standard core being 316 Stainless Steel, with other alloys available on
request.Elastagraph utilises a unique corrugated pattern which increases the depth of the
groove and the pitch of the corrugation. This greatly improves the gasket’s
seal-ability over other corrugated designs.
The increased pitch and groove depth increase Elastagraph’s recovery or
‘spring back’ and reduces the surface area of the gasket for a greater unit
load at initial torque, as well as a lower minimum seating stress. This ensures
maintenance of bolt load during thermal cycling.
The proprietary production process allows the graphite to be applied without the
‘seam’ that is present in other gaskets fabricated from flexible graphite
sheets. Furthermore the inner diameter of the Elastagraph gasket is encapsulated by high
density flexible graphite providing total corrosion resistance and increasing seal-ability
over traditional laminated designs.
Unlike other corrugated designs Elastagraph does not contain any adhesive that would
normally contribute to bolt torque loss.
Availability
ANSI 1 /2” to 24” Class 150 & 300lb. DIN sizes 10,16,25,40 bar. Non
standard sizes/special shapes available upon request.Heat exchanger gaskets are available
in a selection of flange widths from 9.5mm to 25mm.
- Creates a tight seal at low bolt loads
- Can be used where there is insufficient bolt load to seal spiral wound
gaskets
- High and low operating temperatures from -200 Deg C to 450 Deg C
- Excellent chemical resistance – PH range 0 to 14
- Outstanding resistance to thermal cycling
- Safe to handle, fit and easy to remove after service
- Lowest emissions of any corrugated graphite gasket
- Tolerant to flange imperfections
- Pre-compressed graphite resistant to marking/damage during fitting
- Rigid design good for easy posting between flanges
- Moulded identification prevents incorrect gasket sizes being fitted
individually moulded with exfoliated graphite.
